2440mm x 1220mm (8’x4’) 2440mm x 1020mm (8'x 3’4”) for Stainless Steel Designs (600/600, 600/640, 641/000) 3050mm x 1220mm (10’ x 4’) on request.
Standard Production -1.0mm to 1.5mm. Further thickness (up to 10mm) on request.
Genuine metal - Aluminum, Stainless Steel, Copper and Brass, combination with real wood in some designs, with phenolic paper backing. Punched series is solid metal without paper backing. The surfaces are covered with a removable protective foil.
ONLY FOR INTERIOR AND VERTICAL USE. Horizontal use & use in humid environments are limited.
Can be bonded with conventional glues and adhesives, which are used for normal high-pressure laminates. Make sure running direction is the same as the arrow on the foil.
All standard base materials like plywood, block board etc.used for laminates are also suitable for metal laminates. Care should be taken to ensure that this base material does not contain too much moisture which will otherwise cause blistering of the metal foil.
Post forming quality is available upon request at short lead times for almost each item. (Please refer to list of items)
The surface is odorless and can be used in contact with foodstuffs. Clean with mild, conventional cleaning agent s and a damp cloth.
2440mm x 1220mm (8’x4’)
